6.5 mm Headless Compression Screw

Specifications - 6.5 mm Headless Compression Screw

  • Headless design: Headless design of 6.5 mm Headless Compression Screw allows the screw implantation in and around articular regions with minimal soft tissue irritation or risk of interference.
  • Cannulated, for accurate insertion: Cannulated design facilitates accurate percutaneous insertion with minimal soft tissue damage.
  • Gradual compression through variable thread pitch: The wider thread pitch at the tip of the screw penetrates the bone faster than the finer trailing threads, compressing the two fragments gradually as the screw is advanced.
  • Fully threaded: Fully threaded screw provides a higher holding force resulting in increasing stability.
  • Sharp cutting flutes: Sharp cutting flutes in the screw tip facilitate screw insertion.
  • Two types of screws, Fully threaded, Partially threaded.
  • 6.5 mm Headless Compression Screw available in both Titanium and Stainless Steel.
  • 6.5 mm Headless Compression Screw available sizes are 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 110mm, 115mm and 120mm.
  • Any additional length of this screw will be made on demand.
  • Instruments are available for this screw such as Bone Taps, Combined Drill & Tap Sleeve, Counter Sink, Depth Gauge, Drill Bits, Drill Guide, Drill Sleeve, Hollow Mill Screw Removal, Reverse Measuring Device, Screw Drivers and Screw Holding Forceps etc.
  • This is Self Tapping Screw. Self Tapping Screws cuts its own thread while being driven into the bone. It makes a small hole while entering the bone which creates a tight friction fit between the threads. This helps fight vibration loosening and allows the parts to be taken apart if needed.
  • Sterile and non-sterile packaging options available for Headless Compression Screws

Sizes and Uses of 6.5 mm Headless Compression Screw

Headless Compression Screws are designed to be used in bone reconstruction, osteotomy, arthrodesis, joint fusion, fracture repair and fracture fixation of bones appropriate for the size of the device.

6.5 mm Headless Compression Screw is intended for bone fixation of the hand and foot flowing trauma or osteotomy. Self ­Tapping and reverse cutting flutes on both ends of the screw aid with insertion and removal. Tapered profile gaining compression and maximizing pull-out strength along its entire length.

6.5 mm Headless Compression Screw is used for fusions, fractures, or osteotomies of the clavicle, humerus, radius, ulna, ilium, femur, patella, fibula, tibia, talus, malleolus, and calcaneus.